Crab Nebula (M1) — supernova remnant imaged by Herschel and Hubble Space Telescopes

Category: Papers & Publications

Peer-reviewed papers and publications by Harold Aspden

Crab Nebula (M1), supernova remnant · ESA/Herschel/PACS; NASA, ESA & A. Loll/J. Hester (Arizona State Univ.) · NASA Image Library ↗

  • 1995d

    1995d

    The following is a U.K. Patent granted to Harold Aspden on May 8, 1996 with a first publication date of December 6, 1995.

    U.K. PATENT NO. 2,289,994

    ‘MAGNETIC RELUCTANCE MOTOR’

    Abstract: A magnetic reluctance motor has a salient pole rotor 3 interacting with stator poles 1, 2 to form a machine operating on the magnetic reluctance principle. The machine incorporates a shaded-pole feature by introducing an angle of inclination between laminar structures forming the rotor and stator cores. This performs eddy-current screening restricting magnetic flux transit between poles as they separate. It allows the magnetic attraction between poles during the approach phase to drive the motor.

    This patent is based on the same disclosure as that of U.K. Patent No. 2,287,134. The tilted stator poles provide the shaded-pole feature, whereas the other patent concerns the feature of the single solenoidal winding 5 which is powered to drive the machine.


  • 1995c

    1995c

    The following is a U.K. Patent granted to Harold Aspden and Robert George Adams on November 6, 1996 with a first publication date of April 12, 1995.

    U.K. PATENT NO. 2,282,708

    ‘ELECTRICAL MOTOR-GENERATOR’

    Abstract: An electrodynamic motor-generator has a salient pole permanent magnet rotor interacting with salient stator poles to form a machine operating on the magnetic reluctance principle. The intrinsic ferromagnetic power of the magnets provides the drive torque by bringing the poles into register whilst current pulses demagnetize the stator poles as the poles separate. Inasmuch as less power is needed for stator demagnetization than is fed into the reluctance drive by the thermodynamic system powering the ferromagnetic state, the machine operates regeneratively by virtue of stator winding interconnection with unequal number of rotor and stator poles. A rotor construction is disclosed in (Fig. 6, 7). The current pulse may be such as to cause repulsion of the rotor poles.


  • 1995b

    1995b

    The following is a U.K. Patent granted to Harold Aspden on April 16, 1997 with a first publication date of May 3 1995.

    U.K. PATENT NO. 2,283,361

    ‘REFRIGERATION AND ELECTRICAL POWER GENERATION’

    Abstract: The thermoelectric device disclosed in U.K. Patent 2,227,881 is developed by this invention to accentuate the Nernst Effect contribution. By using thin ferromagnetic metal laminations 1 of thickness commensurate with or smaller than the normal magnetic domain size (100 micron) and feeding current transversely through the laminations with heat flow in the laminar planes, the current, regardless of polarity, selects a passage through the lamination which traverses a magnetic domain polarization having a direction in which the Nernst EMF assists the current. This results in a conversion of heat into electricity. A superconducting polymer, oxidized polypropylene, may be used as a heat resistant filler between the laminations to provide the continuity for transverse current flow. Heat sinks 2 are insulated by coatings 3 and connections are made by conductors 4.


  • 1995a

    1995a

    The following is a U.K. Patent granted to Harold Aspden on April May 8, 1996 with a publication date of September 6, 1995.

    U.K. PATENT NO. 2,287,134

    ‘MAGNETIC RELUCTANCE MOTORS’

    Abstract: A magnetic reluctance motor has a salient pole rotor interacting with stator poles to form, a machine operating on the magnetic reluctance principle. The machine incorporates a shaded-pole feature on the stator pole edges which performs eddy-current screening restricting magnetic flux transit between poles as they operate. This allows the magnetic attraction between the poles during the approach phase to drive the motor. A d.c. powered solenoid axially positioned intermediate two sets of rotor poles provides the magnetic polarization of the rotor core body to set up pole flux. The motor may include a permanent magnet fitted as a sleeve on the central part of the rotor core and the d.c. excitation of the solenoid then acts on the inner shaft section to magnetize it in the same direction as the permanent magnet and thereby augment the drive action whilst blocking flux closure from the magnet through the shaft.

    This patent is based on the same patent application as that of granted U.K. Patent No. 2,289,994 (Ref. [1995d] in these Web pages). The difference is that this patent covers the feature of the coaxially-mounted solenoidal winding 5 which powers the machine, whereas the tilted pole feature providing the shaded-pole action is the subject of the invention of Patent No. 2,289,994.


  • 1994e

    1994e

    The following is a Conference paper by H. Aspden published in the Proceedings of the International Symposium on New Energy held in Denver, Colorado on May 12-15, 1994, pp. 1-20.

    ‘MAGNETISM AND THE ENERGY OF CREATION: THE $64 QUESTION: WHAT IS THE ENERGY SOURCE’

    Abstract: By following the theme that ‘energy is money’, the way in which energy transfers in magnets and solenoids is discussed by analogy with a world banking system. There are creative forces in Nature by which energy is shed from a vast reserve to set up the present state of equilibrium between matter and aether. This paper discusses how that equilibrium can be disturbed to give us access to ‘free energy’. It reveals the design secret of the Adams motor and it goes beyond such technology to explain where science went wrong in interpreting important physical phenomena incorrectly. We see why this has meant that the technology of ‘Creation’ has eluded us until now and impeded those who seek better ways to bring new power into industry. It is simply a question of understanding that universal banking system, meaning the energy bank that pervades all space.

    *********

    The delivery of this paper at the Denver International Symposium on New Energy in 1994 marked the author’s introduction of a series of ten Energy Science Reports which the author published between 1994 and 1997, copies of which are to be made available for access via these web pages. This Symposium paper is therefore seen by the author as being an important contribution to the subject.

  • 1994d

    1994d

    This is one of a series of 10 Energy Science Reports made available by the author through U.K. company Energy Science Limited, under the publishing name Sabberton Publications.

    ENERGY SCIENCE REPORT No. 5. POWER FROM WATER: COLD FUSION: PART I

    This Report was first published by the author in 1994 and was reissued later and made more generally available from Sabberton Publications as ISBN 0 085056 0217 in October 1996. It is now made available freely via this Internet facility. It concerns theory pertaining to the creation and properties of deuterons which, as present in atoms in heavy water, deuterium oxide, are involved in the experiments which gave birth to the notion of ‘cold fusion’. The technology of that field is slow to develop and, though the author did plan to write a Part II Report as a sequel to this report, which is entitled POWER FROM WATER: COLD FUSION: PART I, this has not materialized. This Report nevertheless is an important contribution to the theory of the subject, also because it explains how the triton, the third isotope of hydrogen is created. It is worthy of study as an adjunct to the author’s latest work, the book: The Physics of Creation, because the latter explains in updated detail how the proton itself, the primary isotope of hydrogen is created. For this reason it is given priority in updating this website by now adding progressively each of these ten Energy Science Reports as they are withdrawn from normal printed publication. It should be noted that the book just referenced is a substantial work and should not be confused with Appendix A of this Report, which has the same title. The latter featured as a 12 page Chapter 4 in the author’s book GRAVITATION, published in 1975, which gives an early insight into what has now become a 28 year-old account of the origin of proton creation. ………. Harold Aspden, 1 June 2003

    The full text of this Report can be seen via the following link: REPORT No. 5


  • 1994c

    1994c

    The following is a U.K. Patent granted to Harold Aspden on March 26th 1997 with a publication date of May 3 1994.

    U.K. PATENT NO. 2,278,491

    ‘THERMOELECTRIC HEAT TRANSFER APPARATUS’

    Abstract: In order to research the generation of heat by promoting the fusion of protons or deuterons adsorbed by a host metal, the apparatus provides a structural configuration by which the direction of heat flow through the metal is transverse to the direction of an applied magnetic field. Thermal priming means, which may include pre-cooling on the heat output side or electrical heating of the host metal, provide the initial temperature gradient triggering fusion. Alternating current activation of the magnetic field, the intensity of which may be enhanced by using nickel as the host metal, combined with a non-uniformuity of the magnetic field and/or heat flow through the metal, assure the abnormal presence of a residual negative electron poulation in the metal. Such charge nucleates the merger of positive charge and enhances the fusion process.


  • 1994b

    1994b

    The following is a U.S. Patent granted to Harold Aspden with an issue date of December 27, 1994

    US PATENT NO 5,376,184

    ‘THERMOELECTRIC HEAT TRANSFER APPARATUS’

    Abstract: Heat transfer apparatus, whether in panel or tubular form, comprises bimetallic all-ferromagnetic laminations (4). A temperature differential causes thermoelectric current circulation (in effect, a d.c. eddy-current) within each lamination which develops a magnetizing H-field. The ferromagnetic B-field enhancement develops in turn a circulating diamagnetic reaction current which traverses the bimetallic junction interfaces to generate Peltier action which causes an overriding thermal feedback and bistable direction-of-heat-flow operation. Control involves the priming action of an applied magnetic field or preheating by electrical resistors (5) in the heat sinks (1, 2). Application in a thermally powered electric transformer generator is described.

    This patent is a counterpart of U.K. Patent 2,267,995 [1993b]


  • 1994a

    1994a

    The following is a U.S. Patent granted to Harold Aspden as Assignee (coinventor John Scott Strachan) with an issue date of February 22, 1994

    US PATENT NO 5,288,336

    ‘THERMOELECTRIC ENERGY CONVERSION’

    Abstract: A thermopile 30 comprises a stacked assembly of bimetallic layers in which there is full conductor interface contact over the distance separating hot and cold surfaces 31,32. The assembly may include dielectric layers forming a capacitor stack. A.C. current through the stack is matched in strength to the Seebeck-generated thermoelectric current circulating in each bimetallic layer. The resulting current snakes through the stack to cause Peltier cooling at one heat surface and heating at the other. A.C. operation at a kilocycle frequency enhances the energy conversion efficiency as does heat flow parallel with the junction interface.

    This patent is a counterpart of U.K. Patent No. 2,227,881 [1990f]



  • 1993d

    1993d

    The following is a paper by H. Aspden published in Physics Education, v. 28, pp. 340-342 (1993).

    THE FIRST LAW OF THERMODYNAMICS

    This paper discusses the First Law of Thermodynamics in the context of its alternative expression as the Principle of Conservation of Energy. The author wrote this paper in order to emphasize the scope for energy transfer as between the medium of background space, the aether, and matter and introduced the notion that the local aether has a temperature that we sense as the 3K cosmic background temperature.